GMA200-MT16

Powerful controller for sophisticated gas detection systems


Wherever gases are used or may be present in industrial and commercial applications, they must be monitored. A gas detection system consists of one or more transmitters, which use sensors to detect gases, and a controller, which has a wide range of tasks. The GMA200-MT16 controller is ideally suited for use in complex gas detection systems with up to 16 digital or analog transmitters. Safety measures can be connected directly to the GMA200-MT16 via internal relays. The current measured values, alarms and special states of the transmitters can be viewed directly on the controller's display.

Fixed transmitters monitor combustible or toxic gases and vapors present in the ambient air as well as the oxygen concentration. A controller displays the measured gas concentrations centrally and processes the incoming signals. The GMA200-MT16 is the right choice if
 

  • gases are monitored with up to 16 digital or analog transmitters
  • safety measures are to be operated via the controller
  • the measured values are to be shown centrally on a display
  • an acoustic and visual alarm is required on site
  • operating status and alarms are to be indicated by status LEDs


Wide range of applications
The GMA200-MT16 controller and the connected transmitters form a stationary gas detection system for measuring toxic and combustible gases as well as oxygen concentration. Up to 16 digital transmitters can communicate with the controller via the RS-485 interface. Analog transmitters (up to 16) can be connected via 0.2-1 mA or 4-20 mA. The GMA200-MT16 is suitable for any GfG transmitter and any available gas type. This offers a large number of possible combinations of gases, measuring ranges, measuring points and Ex-zones to be monitored simultaneously. The controller is designed for mounting on a DIN rail (TS35), for example in a control cabinet. The supply voltage is 24 V DC.

Internal relays and extensions
For the implementation of safety measures, 6 internal relays with one normally open contact each can be programmed individually. Two additional relays are available for fault messages and maintenance. If required by the application, the number of programmable relays can be increased up to 70 (6 internal and 64 external relays). The relay modules are connected via the GMA bus interface. GfG's GMA200-RT and GMA200-RTD relay modules allow safety measures to be implemented in a decentralized manner, reducing the amount of cabling required.

Clear indicators for assessing the hazard situation
The GMA200-MT16 has a color backlit 2.2-inch display. It shows the current measured values of the connected transmitters at any time. In the event of an alarm, the background color changes from green to red. At the same time, LEDs indicate the alarm level and the switching states of the relays. A local alarm is triggered by a loud, integrated buzzer (70 dB(A)). Two inputs are available for external alarm acknowledgement push buttons.

Operation, visualization and data storage
The operation of the controller and the alarm acknowledgement on site are done intuitively via 5 push buttons. Configuration is possible via the mini-USB interface using a PC and the GMAConfig software. With the optional GMA200-VS software, all measured values and statuses of the connected transmitters can also be displayed decentrally on a PC or monitor. Equipped with a microSD card, the controller permanently stores measured values, average values, alarm events and faults at individually configurable intervals for evaluation.

Key features at a glance:


General information:

  • suitable for every GfG transmitter
  • monitors 1 to 16 measuring points

Features:

  • 8 integrated relays for safety concepts, fault messages and maintenance
  • 0.2-1 mA, 4-20 mA or RS-485 (Modbus)
  • color backlit 2.2" display
  • 15 colored status LEDs
  • audible alarm
  • housing for rail mounting (TS35)

Optional:

  • data logger (microSD card)
  • relay module for expansion (up to 4 modules with 16 relays each)
  • visualization software
  • Uninterruptible power supply

Approvals / Certifications:

  • ATEX certification: II (2) G
  • SIL 2/3

Downloads

Extensions and accessories

GMA200-RT

GMA200-RT


Relay module for extension of the GMA200 series and the GMA22
» more

GMA200-RTD

GMA200-RTD


Relay module with display for extension of GfG controllers
» more

GMA200-RTW

GMA200-RTW


Relay module for wall mounting to expand the GfG controllers
» more

GMA200-TFT8

GMA200-TFT8


TFT display in wall-mounted housing for central visualization of measured values and alarms
» more

GMA200 Visual

GMA200 VS


Visualisation software for GMA200 controller series
» more

Accessories GMA200-MT16

Accessories GMA200-MT16


Complete list of accessories for the GMA200-MT16
» download PDF

Our experts are happy to answer your questions! How to find us