Polytector III G999E
The Polytector III G999E combines the requirements of a modern multi-gas detector for use in personal protection with the ability to clear confined spaces, shafts and vessels by means of an integrated pump. The robust and practical multi-gas detector is equipped with an infrared sensor for CO2 and 4 electrochemical sensors for toxic gases as well as oxygen. In this configuration, the G999E is versatile in use and suitable for a wide range of applications.
For personal protection against a wide range of gas dangers and clearance before entering shafts and confined spaces, the Polytector III G999E is the best choice. The multi-gas detector is equipped with 5 sensors for the detection of up to 7 combustible and toxic gases as well as oxygen. Clearance measurement is done with the integrated pump.
Safety and operation
The Polytector III G999E is certified for use up to Ex zone 0 and is water- and dust-protected according to protection class IP67, making the multi-gas detector suitable for challenging applications. The housing made of rubberised polycarbonate offers excellent protection against shocks and vibrations. The practical design and the robust crocodile clip ensure optimum wearing comfort. Operation is done via three buttons and the colour backlit display, of which the screen can be rotated by 180 degrees if required. For poor light conditions, the G999E offers an explosion-proof torch.
Alerting, battery life and pump performance
If a threshold value is exceeded, the G999E warns its wearer in three ways by light signals, vibration and a loud horn (103 db(A)). The integrated NiMH battery has a runtime of up to 130 hours, depending on the operating mode and sensor configuration. The metering pump delivers around 0.6 litres per minute from a distance of up to 100 metres.
Equipped with an optional radio module, up to 10 portable gas detection devices of the G999 series can be connected to the Connected Safety Monitor TeamLink. The supervisor thus always has an overview of the local readings and the status of each team member. In the event of a gas or man-down alarm, the supervisor can initiate help quickly and in a targeted manner. The G888/G999 Visual software also makes it possible to monitor more than 10 portable gas devices and send short messages.
The DS400/404 docking station can be used to charge, calibrate and adjust the gas detectors of the G999 series. To better distinguish gas detection devices for different applications, they can be marked with diffusion covers in five signal colours. Clearance measurement is made easier with various suction tubes and floating probes. A complete overview of the accessories and all extensions offered for the G999 series can be found at the bottom of this page.
Within the G999 series, the 4 model variants G999C, G999P, G999E and G999M are available. Mandatory for all units are 3 electrochemical and one (combined) infrared sensor. Depending on the variant, the G999 also has a catalytic sensor (G999C & G999M), a PID sensor (G999P) or a fourth electrochemical sensor (G999E). This allows a variety of combinations of up to seven gases or measuring ranges to be monitored simultaneously. The G999M, specially designed for mining, is intrinsically safe (type of protection "ia") and flameproof (type of protection "da") for use in Ex zone 0.
In a nutshell
Start-up and Self-test
Status messages during Start-up
Extensions and accessoires
Connected Safety Monitor for monitoring by radio
Docking station for the functional checks of portable gas detection devices
Test stations for function tests and adjustment with optional charging function
Charging station for portable gas detection devices and the TeamLink
Software for securing individual workstations and large teams
You can find an overview of our test gases here
Here you'll find the complete list of accessories for the G999E
» download PDF