Polytector III G999C

The Polytector III G999C combines the requirements of a modern multi-gas detector for use in personal protection with the ability to clear confined spaces, shafts and vessels by means of an integrated pump. The robust and handy multi-gas detector is equipped with a catalytic combustion sensor for flammable gases, an infrared sensor for CO2 and 3 electrochemical sensors for toxic gases as well as oxygen. In this configuration, the G999C is versatile in use and suitable for a wide range of applications.

The Polytector III G999C is the best choice for personal protection against a wide range of gas dangers as well as clearing confined spaces before entering. The multi-gas detector is equipped with 5 sensors for the detection of up to 7 combustible and toxic gases as well as oxygen. Clearance measurement is done with the integrated pump.

Safety and operation
The Polytector III G999C is certified for use up to Ex zone 1 and protected against the ingress of water and dust according to protection class IP67, making the multi-gas detector suitable for challenging applications. The housing made of rubberized polycarbonate offers excellent protection against shocks and vibrations. Its effective design and the robust crocodile clip ensure high wearing comfort. The G999C is operated via three buttons and the color-backlit display. For better usability, the screen can be rotated by 180 degrees if required, and an explosion-proof flashlight will solve any problems with poor light conditions. 

Alarm, battery life and pump performance
If a threshold value is exceeded, the G999C will warn its wearer in three ways: via light signals, vibration and a loud buzzer (103 db(A)). The integrated NiMH battery will work for up to 130 hours, depending on the operating mode and sensor configuration. The pump can sample around 0.6 liters per minute from a distance of up to 100 meters.

Connected Safety
When equipped with an optional radio module, up to 10 portable gas detection devices of the G999 series can be connected to the Connected Safety Monitor TeamLink. The supervisor thus always has an overview of the local readings and the status of each team member. In the event of a gas or man-down alarm, the supervisor can initiate help quickly and systematically. The G888/G999 Visual software also makes it possible to monitor more than 10 portable gas devices and send short messages.

Accessories
The DS400/404 docking station can be used to charge, calibrate and adjust the gas detectors of the G999 series. To better distinguish gas detection devices for different applications, they can be marked with diffusion covers in five signal colors. Clearance measurement is made easier by various suction tubes and floating probes. A complete overview of the accessories and all extensions offered for the G999 series can be found at the bottom of this page.

Model variants
There are four other models available in the G999 series: the G999C, G999S, G999P and G999M. All of these detectors offer slots for 3 electrochemical and an optional (combination) infrared sensor. Depending on the model variant, G999s also come with a catalytic sensor (G999C & G999M), a PID sensor (G999P), a fourth electrochemical sensor (G999E) or a CC/TC or CC/TC/SC sensor (G999S). This allows you to set up a variety of combinations of up to eight gases or measuring ranges for simultaneous monitoring. The G999M, which was developed specifically for the mining sector, is not only approved for use in Ex zone 0 but also received the M1 label for safe use underground. If you require a multi-gas detector without an integrated pump, the handy Microtector G888 is a great choice. It comes in two different versions: the G888C for use in Ex zone 1 and the G888M, which can be used in Ex zone 0 and is approved for mining applications. Both models feature slots for up to 5 sensors (3x EC, 1x CC, 1x IR).

Downloads

Videos

In a nutshell

Start-up and self-test

Status messages during start-up

Useful functions

Man-down alarm

Zoom display and PEAK function
Measuring in pump mode

Extensions and accessoires

TeamLink G999L


Connected Safety Monitor for monitoring by radio
» more

DS400/404


Docking station for function tests of portable gas detection devices
» more

TS/TX 888/999


Test stations for function tests and adjustment with optional charging function
» more

DIC 888/999


Charging station for portable gas detection devices and the TeamLink
» more

G888/999 Visual


Software for securing individual workstations and large teams
» more

Test gases


You can find an overview of our test gases here
» more

Accessories G999C


Here you'll find the complete list of accessories for the G999C
» download PDF

Our experts are happy to answer your questions! How to find us