Micro IV Pump
Attachable pump for the Micro IV gas detector
Confined spaces have to be analyzed before entering. This is the only way to avoid unexpected dangerous gas concentrations. This battery-powered attachable pump for the Micro IV single-gas detection device was developed specifically for this task.
The pump can be used to check gas concentrations before entering a shaft, duct or tank, and continuously monitor the area thereafter. You will thus be informed about dangers from toxic or combustible gases as well as from oxygen deficiency from a safe distance.
Easy handling
The pump is simply attached to the Micro IV. This allows the handy gas detection device to be used for remote monitoring when clearing confined spaces before entering them. The high-performance pump draws in gas samples without exposing anyone to the potentially dangerous atmosphere. A visual alarm is triggered If the flow rate falls below the minimum or the battery is low.
Equipment and accessories
The flow rate of the attachable pump for the Micro IV is up to 0.5 l/m. It is powered by two batteries (type AA) so as not to rely on the gas detector iteself for power. A green LED indicates the operating status. Its operating time of up to eight hours in continuous operation allows for permanent analysis even during longer jobs. Like the Micro IV, the pump is approved for Ex Zone 1. Accessories include a telescopic suction tube, special test hoses and a floating probe.
Key features at a glance:
- Suitable for Micro IV portable gas detectors
- Safe measurement and analysis of confined spaces
- Up to eight hours of continuous operation
- Independent power supply via two alkaline batteries
- ATEX certification: II 2G Ex ia IIC T4 / T3 Gb (when using approved batteries)
