Reliable controller for gas detection systems in wall-mounted housing
Wherever gases are used or may be present in industrial and commercial applications, they must be monitored. A gas detection system consists of one or more transmitters, which use sensors to detect gases, and a controller, which has a wide range of tasks. The GMA200-MW4 controller is ideally suited for complex gas detection systems with up to 16 transmitters (up to four of which can be analog). Safety measures can be connected directly to the GMA200-MW4 via internal relays. The display will indicate the current measured values as well as any alarms or special states of the transmitters.
Fixed transmitters monitor combustible or toxic gases and vapors present in the ambient air as well as the oxygen concentration. A controller displays the measured gas concentrations centrally and processes the incoming signals. The GMA200-MW4 is the right choice if
- gases are monitored with up to 16 transmitters (up to 4 analog)
- you want safety measures to be operated directly via the controller
- the measured values need to be displayed centrally
- an acoustic and visual alarm is required on site
- you want the operating status and alarms to be indicated by status LEDs
Versatile application possibilities
The GMA200-MW4 controller and the connected transmitters form a fixed gas detection system for measuring toxic and flammable gases as well as the oxygen concentration. Up to 16 digital transmitters can communicate with the controller via the RS-485 interface. Analog transmitters (up to 4) can be connected via 0.2-1 mA or 4-20 mA. The GMA200-MW4 is suitable for any GfG transmitter and any available gas type. This offers a large number of possible combinations of gases, measuring ranges, measuring points and Ex zones to be monitored simultaneously. The robust housing (IP65) for wall mounting can be installed in almost any location. The supply voltage is 100-230 V AC or 24 V DC.
Internal relays and extensions
Four internal relays with one normally open contact each can be programmed individually to implement safety measures. Two additional relays are available for fault messages and maintenance. If your area of application requires it, the number of programmable relays can be increased to up to 68 (4 internal and 64 external relays). The relay modules are connected via the GMA bus interface. GfG's GMA200-RT and GMA200-RTD relay modules allow safety measures to be implemented in a decentralized manner, reducing the amount of cabling required.
Clear indicators for assessing the hazard situation
The GMA200-MW4 has a color backlit 2.2-inch display on which the current measured values of the connected transmitters are indicated at any time. In the event of an alarm, the background color changes from green to red. At the same time, LEDs indicate the alarm level and the relay switching states. A local alarm is triggered by seven easily visible, bright alarm LEDs and a loud, integrated buzzer (100 dB(A)). Two input slots are available for external alarm acknowledgement push buttons.
Operation, visualization and data storage
The controller is operated via five push buttons and the alarm is intuitively acknowlegded the same way. The device can be configured via the mini-USB interface using a PC and the GMAConfig software. With the optional GMA200-VS software, all measured values and states of the connected transmitters can also be displayed decentrally on a PC or monitor. Equipped with a microSD card, the controller permanently stores measured values, average values, alarm events and faults at individually configurable intervals for evaluation.
Key features at a glance:
- Suitable for every GfG transmitter
- Monitors 1 to 16 measuring points
- 6 integrated relays for safety concepts, fault messages and maintenance (4 of which can be programmed freely)
- 0.2-1 mA, 4-20 mA or RS-485 (Modbus)
- Color backlit 2.2" display
- 13 colored status LEDs
- Visual and audible alarm
- Housing for wall mounting (IP65)
- Data logger (microSD card)
- Relay module for expansion (up to 4 modules with 16 relays each)
- Visualization software
- Uninterruptible power supply
Approvals / Certifications:
- ATEX certification: II (2) G
- SIL 2/3
Extensions and accessories
Relay module for extension of the GMA200 series and the GMA22
Relay module with display for extension of GfG controllers
Relay module for wall mounting to expand the GfG controllers
TFT display in wall-mounted housing for central visualization of measured values and alarms
Uninterruptible power supply for the controllers of the GMA200 series
Visualisation software for GMA200 controller series
Complete list of accessories for the GMA200-MW4
» download PDF